zcM1000P504 Replacement Instructions
- Remove 4 each P233 screws and 1 each P106 knob, then lift cover from tape dispenser.
- Unplug connectors from P111 transformer, P187 cut motor, P435 feed motor and P200 cut head inlet.
- Unscrew 3 each P232 screws and 1 each P239 screw that mount board to machine.
- Remove board by tilting it forward and lifting it out toward the back of the machine.
- Place new board into machine and mount in same place as old board.
- Reconnect all transformer, motors and inlet. Replace cover.