TDH205 Troubleshooting Guide
Not Cutting:
- Check and clean blades, replace if dull
- Check for worn or broken lower blade spring
- Check lower blade adjustment
Not Feeding:
- Check yoke spring adjustment
- Check feed gear assembly for missing or flattened teeth
- Check for missing feed handle pawls
- Check blades for accumulated grease or tape resins and clean if needed
- Check set screw on feed wheel
- Check upper tape plate for binding
Jamming:
- Check main gear for missing or flattened teeth
- Check lower tape plate for bending
- Check for bent pressure plate shaft
- Check upper tape plate for binding
- Check for missing water brush