TDA025 Troubleshooting Guide
No Power:
- Make sure unit is plugged in
- Turn power switch on
- Check fuse (48)
- Make sure Safety Cover (14) is fully closed
Tape not sticking to carousel:
- Wipe down Carousel (1) with IPA
- Tighten screw on Lever (46) to increase length of tape placed on carousel
- Loosen screw on Arm Frame (42) to increase hold down pressure on tape
Won’t cut:
- Clean blades (21/25) using IPA or equivalent
- Inspect blades for nicks and/or wear, replace as needed
- Using the two adjustment screws behind the upper blade, adjust blade inward by alternately tightening the two screws
Won’t feed / Tape jam:
- Check upper and lower blade spacing to ensure the blades do not overlap and jam
- Clean Tape Bite (29) with IPA
- Clean Upper Blade (25) and Lower Blade (21) with IPA
Hand crank not working:
- Remove body (11)
- Remove Gear Cover (62)
- Check spring on Lever (68)