LD6000/LDX6000 Series Parts List
|
Part # |
Description | Notes | Used On |
| ASM-005-01 | Wire Harness for LD6000 and LDX6000 |
This part number includes all of the wires to assemble electrical components |
LD6000 & LDX6000 Series |
| ASM-006-01 | Brush & Brush Holder Assembly for LD5000 |
2 parts assembled together; not sold individually. |
LD5000 Series |
| ASM-006-02 | Brush & Brush Holder Assembly for LD6000 |
2 Parts assembled together; not sold individually. |
LD6000 Series |
| ASM-006-03 | Brush & Brush Holder Assembly for LDX6000 |
2 Parts assembled together; not sold individually. |
LDX6000 Series |
| ASM-012-01 | AC Wiring Plate WITH Power Inlet and Switch |
On/Off Switch, Power Inlet assembled on |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-002-01 | Insulated Terminal for Wire Harness (Lug, Press On) | LD6000, LDX6000, LD8000, & LDX8000 Series | |
| ELE-030-01 | 115V – 25 RPM AC Motor | 25 RMP motor for short labels | LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-030-02 | 220V – 25 RPM AC Motor | 25 RMP motor for short labels | LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-030-03 | 115V – 50 RPM AC Motor | Standard motor for all LD models | LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-030-04 | 220V – 50 RPM AC Motor | Standard motor for all LD models | LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-030-05 | 115V – 100 RPM AC Motor | Super speed option for faster dispensing | LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-032-01 | Power Switch for AC Label Dispensers |
Suggested to purchase ASM-012-01 for
|
LD6025, LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-033-01 | AC Photo Sensor – Standard |
LD6000, LDX6000, LD8000, & LDX8000 Series |
|
| ELE-033-02 | Photo Sensor – For Clear Materials |
Used on “C” Models of LD’s. Works with
|
LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-034-01 | Solid State Relay For AC LD’s | LD6000, LDX6000, LD8000, & LDX8000 Series | |
| ELE-035-01 | AC Power Inlet for LD’s |
Suggested to purchase ASM-012-01 for |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| POWERADAPTOR-C | Euro Plug Adaptor (France, Italy, etc) |
This is an Adaptor only used with Euro / |
Schuko Plug |
| POWERCORD-B | Power Cord – USA | 3 Prong, Grounded, 6 Foot (2m)
power cord |
All Label Dispensers |
| POWERCORD-B25 | Power Cord – USA 25′ Long |
3 Prong, Grounded, 25 Foot (11.8m) |
All Label Dispensers |
| POWERCORD-F | Power Cord – Euro (Schuko) | 2 Prong, Grounded, 2 meter power cord | All Label Dispensers |
| POWERCORD-G | Power Cord – UK | 3 Prong, Grounded, 2 meter power cord | All Label Dispensers |
| ELE-046-01 |
Fuse |
Assembled inside the Power Inlet. Look inside your machine; there could be an extra one. |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-047-01 |
Insulated Spade Terminal |
Used on wiring to connect motor wire to relay and black wire on AC photosensor |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-048-01 |
3 Port Connector |
|
LD6000, LDX6000, LD8000, & LDX8000 Series |
| ELE-049-01 |
4 Port Connector |
Used when haing to replace wiring |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-002-01 | FHCS, #10-32X1″, Screws for Strip Plate, Guide Rod and 2 spaces on the main plate | 1/8″ hex wrench needed | LD6000 & LDX6000 Series |
| OTS-003-01 | BHCS, Button Head, 10-32×1″ for LD6050 Main Plate | 1/8″ hex wrench needed | LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-003-02 | BHCS, Button Head, 10-32x.5″ for Brush and Sensor Bracket | Optional part to permanently secure the sensor brack and brush holder | LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-003-03 | BHCS, Button Head, 10-32x.375″ for LD6050 Relay & Secure mount for sensor | Used to mound relay on AC wiring plate | LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-004-01 |
Screws for End Cap for Motor Cover (FHCS, #10-32X.5″) |
Used on specific range of serial numbers
|
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-005-01 | Wing Screw for Brush Holder and Sensor Bracket (10-32 x .5″) | Used for the Brush Holder and Sensor
Bracket |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-007-01 | Thumbscrews for Sensor Nut Plate (#4-40X.75″) | Used to adjust the Sensor Horizontally on the Sensor Bracket |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-010-01 | Ground Wire Hex Nut (#10-32) | Nut, used for ground wire and sensor bracket mounting |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-011-01 | Screws for Reel Holder Arm (PRT-019-01) (FHCS, #5/16-18X3/4) | Mounts to the Motor Cover and the Reel Hanger Bar | LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-012-01 | Core Holder – 3″ (76mm) | Converts 3″ Label rolls to 1″ to mount
properly on the Reel Holder Bar |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-012-02 | Core holder – 6″ (152mm) | Converts 6″ label rolls to 3″ to mount properly | LDHANGTAB |
| OTS-014-01 | #10 Washer, Zinc coated steel | To mount 100 RPM motors to old style main plate | LD6100, LD5000 Series |
| OTS-015-02 | Set Screw for Take-Up Hub (PRT-017) (#8-32X.125/Black) | Used to mount the Take-Up Hub (PRT-
017) on the motor Shaft |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-022-01 | Hex Key, 3/16″ | Used with OTS-011-01 on PRT-019-01 | LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-028-01 | #10 Washer, Stainless Steel (MIL Spec AN960-C10L) | Very thin Washer for smooth adjustment of Sensor Bracket | LD6000 Series |
| OTS-040-01 | Rubber Feet |
Rubber Feet used on the bottom of all |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-043-01 |
Screw, Thread Forming Type B, #10-16 X 1″ (.125″ Hex) |
Onlye used if your 1″ 10-32 screw becomes stripped |
LD6000, LDX6000, LD8000, & LDX8000 Series |
| OTS-050-01 |
Cable Tie Mount |
LD6000, LDX6000, LD8000, & LDX8000 Series |
|
| OTS-051-01 |
Cable Ties |
LD6000, LDX6000, LD8000, & LDX8000 Series |
|
| PRT-003-01 | Strip Plate For LD5000 | LD5000 Series | |
| PRT-003-02 | Strip Plate for LD6000 | LD6000 Series | |
| PRT-003-03 | Strip Plate for LDX6000 | LDX6000 Series | |
| PRT-005-01 | Material Guide, Large, for Reel Holder (Standard) | For use with PRT-016 and PRT-016.1 | LD6000, LDX6000, LD8000, & LDX8000 Series |
| PRT-005.1-01 | Material Guide for Guide Rod, Large | For use with PRT-016 and PRT-016.2 | LD6000, LDX6000, LD8000, & LDX8000 Series |
| PRT-011-01 | Motor Cover for LD and LDX Series Dispenser |
LD6000, LDX6000, LD8000, & LDX8000 Series |
|
| PRT-013-01 | End Cap for Motor Cover | LD6000, LDX6000, LD8000, & LDX8000 Series | |
| PRT-014-01 | Main Plate for LD6000 and LDX6000 | LD6000 & LDX6000 Series | |
| PRT-016.1-03 | Reel Hanger Bar – 1″ for LD6000, 5.5″ Length | LD6000 Series | |
| PRT-016.1-06 | Reel Hanger Bar – 1″ for LDX6000, 7.75″ Length | LDX6000 Series | |
| PRT-017.1-02 | Take-up Hub Roller – 1.25″ for LD6000, 5.5″ Length | LD6000 Series | |
| PRT-017.1-03 | Take-up Hub Roller – 1.25″ for LDX6000, 8″ Length | LDX6000 Series | |
| PRT-018.1-02 | Photo Sensor Mounting Bracket for LD6000, 5.5″ Length | LD6000 Series | |
| PRT-018.1-03 | Photo Sensor Mounting Bracket for LDX6000, 5.5″ Length | LDX6000 Series | |
| PRT-019-01 | Reel Holder Arm for LD6000 and LDX6000, 8″ Length | LD6000 & LDX6000 Series | |
| PRT-020.1-03 | Lock Rod for LD6000 Series | LD6000 Series | |
| PRT-020.1-06 | Lock Rod for LDX6000 Series | LDX6000 Series | |
| PRT-022-03 | Guide Rod Bumped for LD6000, 5.5″ Length |
LD6000 Series |
|
| PRT-022-04 | Guide Rod Bumped for LD6000, 8″ Length |
LDX6000 Series |
|
| PRT-023-01 | Material Guide for Guide Rod, Small |
LD6000, LDX6000, LD8000, & LDX8000 Series |
|
| PRT-024-01 | LDX6000 Base Extension, 8.75″ |
LDX6000 Series |
|
| PRT-032-01 | Guide Rod Spacer, .25″ x .6″ | LD6000 Series | |
| PRT-059-01 | Nut Plate for Standard Photo Sensor | LD6000, LDX6000, LD8000, & LDX8000 Series |