• Manual tape dispenser with hand lever advances and cuts predefined lengths of tape in low production applications
• Cuts tape from 0.25 to 1″ (6 to 25 mm) wide, in lengths from 0.50 to 4″ (13 to 102 mm)
• Specific cut lengths are set by adjusting the hand lever
• Tape is advanced by pulling the hand lever
• Tape is cut by pulling across the serrated blade
• .25″ – 1″ (6 – 25mm) in Tape Width
• .50″ – 4″ (13 – 102mm) in Tape Length
• Maximum outside diameter of roll is 4.75″ (120mm)
• Sturdy base for stability
• Manufactured of Japanese components

Tape dispensers hold and cut tape. They are used in manufacturing, assembly, and packaging. Tape guns are portable, hand-held tape dispensers that are useful for small jobs. Table-top dispensers allow an operator to tear off the tape and then bring it to the point of application. Manual table-top dispensers allow an operator to pull and tear any amount of tape, or to dispense a fixed amount of tape by use of a hand lever. Electric dispensers may be actuated by the push of a button or by a sensor that detects when the previously cut length of tape has been removed. Most tape dispensers work with pressure-sensitive tapes, such as transparent office tape, packing tape, or strapping tape. Gummed tape dispensers, also known as water-activated tape dispensers, work with water-activated adhesive tape. These dispensers moisten each piece of tape as it is dispensed.

• zcM0300 Manual Tape Dispenser
• Instructions